The exact number of units (typically kWh – kilowatt-hours) a 1.5-ton AC consumes in an hour depends on several factors, making it difficult to give a precise answer. However, here’s a breakdown to help you estimate its energy consumption:
Factors Affecting Power Consumption:
-
Energy Efficiency Rating: Look for the Energy Efficiency Ratio (EER) or Bureau of Energy Efficiency (BEE) star rating of your AC unit. Higher ratings indicate better efficiency and lower energy consumption per unit of cooling.
- A typical 1.5 ton, 3-star rated AC might use around 1.6 units per hour, while a 5-star rated AC could use closer to 1.2 units per hour under similar conditions.
-
Operating Conditions:
- Ambient Temperature: A hotter environment will make the AC work harder to maintain the desired temperature, increasing energy consumption.
- Thermostat Setting: A lower thermostat setting creates a bigger difference between indoor and outdoor temperatures, causing the AC to run more frequently and consume more energy.
- Humidity Levels: Higher humidity levels make it feel warmer, potentially leading to longer AC runtime and increased energy use.
-
Ductwork and Insulation: Leaky ducts or poor building insulation allow cool air to escape and warm air to enter, forcing the AC to work harder and consume more energy.
Estimation Methods:
-
Rule of Thumb: A rough estimate suggests a 1.5-ton AC might consume 1.2 to 1.7 units per hour. However, this is a broad range and may not be accurate for your specific situation.
-
Manufacturer’s Information: Refer to your AC unit’s manual or manufacturer’s website for its rated power consumption or amperage draw. You can then use the following formula to estimate hourly consumption:
Estimated hourly consumption (kWh) = Amperage (A) x Voltage (V) x Operating Time (hours) / 1000
Looking to install a commercial HVAC System or Duct work in your Business Area?
Contact Vipul Ac to learn about our HVAC Service
Call +91 8000092000 Today.
