Variable Refrigerant Flow Technology (VRF): MHI VRF systems use Variable Refrigerant Flow technology, which allows for precise control of the amount of refrigerant flowing to each indoor unit. This enables efficient cooling and heating operations based on the specific requirements of each zone.
High Efficiency: MHI VRF systems are designed for high energy efficiency, helping users to reduce energy consumption and operating costs. This is achieved through advanced inverter technology and the ability to match the capacity to the actual load.
Wide Capacity Range: MHI VRF systems typically offer a wide capacity range, making them suitable for both small and large-scale applications. This flexibility allows for the efficient heating and cooling of spaces with varying requirements.
Individual Zoning: The VRF technology enables individual zoning, allowing for different temperature settings in different zones or rooms. This is beneficial for maintaining comfort and energy efficiency.
Heat Recovery and Heat Pump Options: Many MHI VRF systems offer both heat pump and heat recovery options. Heat recovery systems allow simultaneous heating and cooling in different zones, optimizing energy use.
Advanced Controls: MHI VRF systems often come with advanced control systems that allow users to monitor and manage the system remotely. This can include features like scheduling, temperature control, and troubleshooting alerts.
Quiet Operation: MHI VRF systems are designed to operate quietly, making them suitable for various environments, including residential, commercial, and hospitality spaces.
Advanced Refrigerant Technology: These systems often incorporate environmentally friendly refrigerants with low global warming potential (GWP), aligning with modern environmental standards and regulations.
Design Flexibility: MHI VRF systems provide design flexibility with long refrigerant piping lengths and the ability to connect multiple indoor units to a single outdoor unit.
A Variable Refrigerant Flow (VRF) system is an advanced HVAC technology that controls the flow of refrigerant to multiple indoor units, providing energy-efficient heating and cooling for different zones within a building.
MHI's VRF system offers precise temperature control for individual zones, simultaneous heating and cooling, and high energy efficiency compared to traditional HVAC systems.
Benefits include energy efficiency, individualized comfort control, heat recovery capabilities, quiet operation, and design flexibility.
MHI VRF systems are suitable for a wide range of applications, including residential, commercial, and industrial buildings, due to their flexibility and scalability.
Heat recovery in MHI VRF systems allows simultaneous heating and cooling in different zones, optimizing energy use and providing superior comfort.
Yes, MHI is committed to using environmentally friendly refrigerants with low Global Warming Potential (GWP) in their VRF systems, aligning with global environmental standards..
MHI offers a variety of indoor unit options, including ceiling cassettes, wall-mounted units, floor-standing units, and ducted units, providing design flexibility for different spaces.
While installation complexity can vary, MHI VRF systems are designed for flexibility, and features like long refrigerant piping lengths can simplify the installation process.
Yes, MHI VRF systems typically include advanced control systems that enable remote monitoring, temperature adjustment, scheduling, and diagnostics.
Technical support and documentation can be obtained from authorized dealers, distributors, or directly from Mitsubishi Heavy Industries. Online resources and customer support channels are available.
Check with local energy authorities or MHI for information on potential rebates or incentives for choosing energy-efficient HVAC solutions.
AC Distributor / AC Dealers / Channel Partner / HVAC Contractor of a wide range of VRF or VRV AC products which include 4-way Cassette, 4-way Mini Cassette, 2-way Cassette, 1-way Cassette, MHI Floor Standing and 1.00 tr toshiba hi-wall inverter ac.
RANGE MINIMUM (4HP) 3.2 TR TO MAXIMUM (6HP) 4.8 TR
COMPACT – space saving (Industries Compact in Size as well as lightest in weight).
Efficient & high performance 100% Inverter type Compressor.
Industry Bests Coefficient of Performance (COP)
Operates on environment friendly refrigerant R-410A
RANGE MINIMUM (8HP) 6.4 TR TO MAXIMUM (12HP) 9.6 TR
DESIGN FLEXIBILITY- suitable for large as well as Small sized buildings.
Industries Leading Total Piping length up to 510m.Higher external static pressure for condenser fans Automatic test operation function
RANGE MINIMUM (12HP) 9.8 TR TO MAXIMUM (48HP) 38.4 TR
MEMORY FUNCTION – Eliminate malfunctions.
Industries Leading Total Piping length up to 1000m.
High combination ratio (Indoor unit vs. Outdoor unit)
Compatible with building management control system – optional.
MODEL NO : FDT28, FDT36, FDT45, FDT56, FDT71, FDT90, FDT112, FDT140, FDT160.
QUIET SOUND LEVEL : As low as 30 dB(A)
RANGE : 0.8 TR to 4.6 TR
INDIVIDUAL FLAP CONTROL SYSTEM : According to room temp. Conditions, four directions of air flow can be controlled by individual flap as preferred. As individual flap contol is available even after installation, area became wider than before.
INBUILT DRAIN PUMP : Water lift-up mechanism.
THINNEST DESIGN : Thanks to new design of heat exchanger from 2 parts to 1 part, the height of indoor unit is reduced drastically.
MODEL NO: FDTC15, FDTC22, FDTC28, FDTC36, FDTC45, FDTC56
RANGE: 0.4TR to 1.56TR
COMPACT IN SIZE – Corresponds with 600mm x 600mm architectural module ceiling design.
COMFORTABLE AIRFLOW – Wide variation of choice Built- in condensate drain pump
INDIVIDUAL FLAP CONTROL SYSTEM : According to room temp. Conditions, four directions of air flow can be controlled by individual flap as preferred. As individual flap control is available even after installation, area became wider than before
MODEL NO: FDTW28, FDTW45, FDTW56, FDTW71, FDTW90, FDTW112, FDTW140
RANGE: 0.8 TR to 4.0 TR
TRANSPARENT ACCESS HOLE TO DRAIN PAN: Dirt condition of the bottom of a drain pan can be checked through this transparent access hole without removing drain pan. BUILT- IN condensate drain pump.
MODEL NO: FDTS45, FDTS71
RANGE: 1.28TR & 2.0TR
COMPACT IN SIZE – Height of the machine is 220mm only.
Built- in condensate drain pump
MODEL NO: FDTQ22, FDTQ28, FDTQ36
RANGE: 0.6 TR to 1.0 TR
COMPACT IN SIZE – Corresponds with 600mm x 600mm architectural module ceiling design
COMPACT DESIGN: Comfortable effective cooling for small rooms, with low fan speed airflow at just 5.4 cubic meter per minute
BUILT- IN: condensate drain pump
MODEL NO: FDU45, FDU56, FDU71, FDU90, FDU112, FDU140, FDU160, FDU224, FDU280
EXTERNAL STATIC PRESSURE CONTROL: External static pressure (E.S.P.) can be increase or decrease in wired remote control
REDUCTION OF WEIGHT: 6 kg less weight than previous models
REDUCTION OF SOUND PRESSURE LEVEL: 8 DB less noise than previous models.
WIDE RANGE: 1.6 TR to 8.4 TR
STATIC ADVANTAGE: Availability in a wide range of 50 to 200 pascals. Ideal for Hotel & Apartment Applications
MODEL NO: FDUM22, FDUM28, FDUM36, FDUM45, FDUM56, FDUM71, FDUM90, FDUM112, FDUM140, FDUM160
DESIGN FLEXIBILITY: Expansion of external static pressure
WIDE RANGE: 0.6 TR to 4.6 TR
THIN DESIGN: The height of all FDUM models is only 280 mm
STATIC ADVANTAGE: Availability in a wide range of 50 to 200 pascals. Ideal for Hotel & Apartment Applications
_LOW_STATIC_PRESSURE.png "DUCT CONNECTED (THIN)- LOW STATIC PRESSURE")
MODEL NO: FDUT15, FDUT22, FDUT28, FDUT36, FDUT45, FDUT56, FDUT71
QUIET SOUND LEVEL : As low as 25 dB(A)
RANGE : 0.4 TR to 2.0 TR
.png "DUCT CONNECTED (COMPACT & FLEXIBLE)")
MODEL NO: FDUH22, FDUH28, FDUH36
WIDE RANGE: 0.6 TR to 1.0 TR
THIN DESIGN & LIGHT WEIGHT: The height of all FDUH models is only 257 mm & Weight is only 20 kg
Ideal for Hotel & Apartment Applications
Model No: FDK22, FDK28, FDK36, FDK45, FDK56, FDK71
Low Operation Sound Level: Sound Level as low as 31 dB(A)
Range : 0.6 TR to 2 TR
Innovative Design: New FDK model adopts the air flow design that’s proven to minimise resistance in a CFD analysis to achieve uniform air conditioning to the furthest corners of the room. Flap Control System: Selection of flap position is possible, a flap can be set as different angles
MODEL NO: FDE36, FDE45, FDE56, FDE71, FDE112, FDE140
RANGE: 1.0 TR to 4.0 TR
FLAP CONTROL SYSTEM: Selection of flap position is possible. A flap can be set as different angles
SLIM DESIGN: Slim & Sleek Design Starting at just 28 kg in weight means quick, easy & neat installation
INSTALLATION WORK ABILITY: Refrigerant Piping can be routed in 3 directions (rear up & right)
MODEL NO: FDFW28, FDFW45, FDFW56
Range : 0.8TR to 1.6TR
EASY MAINTENANCE – Front of unit
QUIET SOUND LEVEL : As low as 30 dB(A)
SOPHISTICATED DESIGN : Choice of wall hanging, floor standing or behind gallery installation is available
FLAP CONTROL SYSTEM : Selection of flap position is possible. A flap can be set as different angles
CONVENIENT TO USE OPERATION : Simultaneous lower & upper air outlets or upper outlets can be selected by airflow direction button
Chassis unit for discrete customisable installation
Complete with removable filters
Pipes can be connected to the unit either from the bottom or rear
Easy to install
MODEL NO: FDFU28, FDFU45, FDFU56, FDFU71
RANGE : 0.8TR to 2.0TR
Gives high class interior design. Installed in skirting wall of perimeter
MODEL NO: FDU500, FDU850, FDU1300, FDU1800
RANGE : 2.6 TR TO 8.0 TR
COMBINES FRESH AIR TREATMENT & AIR-CONDITIONING SUPPLIED FROM SINGLE SYSTEM Air conditioning and outdoor air processing can be accomplished using a single system COMPACT DESIGN: Design at just 360 mm in height & high static pressure of 200 pa. Connectivity with outdoor unit 8 to 48 HP.
MODEL NO: SAF250, SAF350, SAF500, SAF650, SAF800, SAF1000
AIRFLOW (CUBIC METER PER HOUR): 250 to 1000
KEY FEATURES:Reduces Airconditioning load Easy installation in ceiling due to low heightNight time free cooling operation
MODEL NO: SAF-DX250, SAF-DX350, SAF-DX500, SAF-DX650, SAF-DX800, SAF-DX1000
AIRFLOW (CUBIC METER PER HOUR): 250 to 1000
KEY FEATURES INTERLOCKING WITH AC IDUSUPERLINK CONNECTION AVAILABLE Connectivity with all MHI KX6 outdoor unit.
Return Air Temperature Control or supply air temperature control can be selectable.